Metal laser cutting machine is how to cut copper material
Release time:
2022-03-10
Metal laser cutting machine is how to cut copper material
For the cutting of copper products, many workers have many problems with the specific operation and parameter adjustment of the metal laser cutting machine. Cutting is not only the use of machine cutting, but also some experience problems. Let's introduce how the metal laser cutting machine cuts copper materials.
Highly reflective metal materials have always been difficult to cut by metal laser cutting machines, including copper, aluminum, gold and other metal materials. These materials are also common materials in our daily processing. Solving the problem of cutting highly reflective materials by metal laser cutting machines is now an important problem for many Shenzhen metal laser cutting machine manufacturers.
When cutting highly reflective metal materials need to add auxiliary gas, when the laser cutting machine cutting metal copper, the added auxiliary gas reacts with the material under high temperature conditions, increasing the cutting speed, such as the use of oxygen can achieve the effect of combustion. For laser cutting equipment, nitrogen is an auxiliary gas to improve the cutting effect. For copper materials below 1MM, the metal laser cutting machine can be processed completely.
Therefore, when using a metal laser cutting machine, there is no need to worry about whether it can be cut off. At this time, the processing effect should be paid attention to, so the use of nitrogen as the auxiliary gas is the best. When the thickness of the metal copper reaches 2MM, it is impossible to process with nitrogen. At this time, oxygen must be added to oxidize it to achieve cutting.
Related News
